SEARCH  |  ENQUIRY     

 

Home Products Heat Exchangers Intercoolers

 

United Heat Transfer Pvt. Ltd, is an OEM supplier of  Inter coolers to many manufacturers in the Industrial Compressor and engineering industries.

 

UHT supplies heat exchanger for cooling air/Gas discharged from compressors. It provides the most effective means of removing moisture from compressed air and gases.

 

DESIGN

 

AS PER ASME Section VIII Div. 1, Div. 2, TEMA, API 660, 661, IS 2825 & IS 4503.

  

Inter cooler:

Most industrial compressors operating today are a multistage design. To optimize the cost of compressing gases it is popular to use multi-stage industrial compressor.  When the Air compressor compresses air, heat is generated this causes the air to expand requiring an increase of horsepower for further air compression.  If we remove the heat generated by compressing air, the total horsepower required for addition air compression is reduced up to 15%. For a multi stage compressor is to cool the gas between compression stages. Thus the role of the compressor intercooler is to provide colder, dryer, denser air to the next stage of compression. In addition to inter stage coolers, the compressor's final discharge is usually routed through an after cooler, which also provides colder and dryer gas to the end use point.

 

We provide Intercooler to suit compressor mounting by maintaining critical nozzle distance, as well as side mountings with volume bottles to avoid pulsation.

 

EFFICIENCY
Moisture Separator are largely used for the separation of coarse mist (or spray) from gases and vapors. A limit drop size (Dp) is used to characterize them and it is defined as the smallest particle which can be removed to an extent of 99%.

 

PRESSURE DROP
Due to the large percentage of the cross section available for gas flow, the pressure drop in a vast majority of applications is less than 250-500 mm WC. As mentioned above, for high efficiency applications, a larger pressure drop is to be expected.
 

Thermal Calculation are done on the based on suction condition

 

  • Normal condition     (0 °C, 760 mmHg)

  • Standard Condition  (60 °F,14.7 Psig)

  • Actual Volume

  • As per customer’s requirement

 

Material of Construction:

Size ranging from 3” to 100” in diameter & 40’ (Feet) in length.

 

Shell:

 

  • 90/10 Cupronickel,                

  • 70/30 Cupronickel,

  • Carbon steel,

  • Stainless Steel - 304, 304L, 316, 316L

  • Hastolly

  • Inconel

  • Monel

 

Tube sheet:

 

  • 90/10 Cupronickel,                

  • 70/30 Cupronickel,

  • Naval Brass,

  • Carbon steel,

  • Stainless Steel - 304, 304L, 316, 316L  

  • Hastolly

  • Inconel

  • Monel

Tubes:

 

  • 90/10 Cupronickel,               

  • 70/30 Cupronickel,

  • Copper,

  • Stainless Steel - 304, 304L, 316, 316L  

  • Al. Brass,

  • As per customer requirement.

Channels/Headers/End covers:

 

  • Cupronickel,

  • Nickel Aluminum Bronze,

  • Gunmetal-Naval Grade,

  • Graded  Cast iron,

  • Carbon steel,

  • Stainless Steel - 304, 304L, 316, 316L

  • Hastolly

  • Inconel

  • Monel

 

PRODUCTS | SEARCH | ENQUIRY | CONTACT US

United Heat Transfer, India   Top Of Page

 
 
 

 

Copyright © 2009 All rights reserved. All data is provided for informational purposes only.

Site Developed & Maintained By:  C-Tech Solutions

free hit counter