Home  |  News | Business Enquiry  |  Contact Us   




manufacturers-heat-exchangers-india-export Products reasonable-quality-heat-exchangers-equipment-india Shell & Tube Heat Exchangers  reasonable-quality-heat-exchangers-equipment-india Inter Coolers



United Heat Transfer Pvt. Ltd, is an OEM supplier of Inter coolers to many manufacturers in the Industrial Compressor and engineering industries. UHT supplies heat exchanger for cooling air/Gas discharged from compressors. It provides the most effective means of removing moisture from compressed air and gases.


ASME Section VIII Div. 1, Div. 2,

API 660, 661, IS 2825 & IS 4503.

Inter cooler:
Most industrial compressors operating today are a multistage design. To optimize the cost of compressing gases it is popular to use multi-stage industrial compressor. When the Air compressor compresses air, heat is generated this causes the air to expand requiring an increase of horsepower for further air compression. If we remove the heat generated by compressing air, the total horsepower required for addition air compression is reduced up to 15%. For a multi stage compressor is to cool the gas between compression stages. Thus the role of the compressor intercooler is to provide colder, dryer, denser air to the next stage of compression. In addition to inter stage coolers, the compressor's final discharge is usually routed through an after cooler, which also provides colder and dryer gas to the end use point.

We provide Intercooler to suit compressor mounting by maintaining critical nozzle distance, as well as side mountings with volume bottles to avoid pulsation.

Moisture Separator are largely used for the separation of coarse mist (or spray) from gases and vapors. A limit drop size (Dp) is used to characterize them and it is defined as the smallest particle which can be removed to an extent of 99%.

Due to the large percentage of the cross section available for gas flow, the pressure drop in a vast majority of applications is less than 250-500 mm WC. As mentioned above, for high efficiency applications, a larger pressure drop is to be expected.

Thermal Calculation are done on the based on suction condition



  • Normal condition (0 °C, 760 mmHg)

  • Standard Condition (60 °F,14.7 Psig)

  • Actual Volume

  • As per customer’s requirement

Material of Construction:
Size ranging from 3” to 100” in diameter & 40’ (Feet) in length.


  • 90/10 Cupronickel,

  • 70/30 Cupronickel,

  • Carbon steel,

  • Stainless Steel - 304, 304L, 316, 316L

  • Hastolly

  • Inconel

  • Monel

Tube Sheet:
  • 90/10 Cupronickel,

  • 70/30 Cupronickel,

  • Carbon steel,

  • Naval Brass

  • Stainless Steel - 304, 304L, 316, 316L

  • Hastolly

  • Inconel

  • Monel


  • 90/10 Cupronickel,

  • 70/30 Cupronickel,

  • Copper

  • Stainless Steel - 304, 304L, 316, 316L

  • Al. Brass

  • As per customer requirement

Channels / Headers/ End Covers:

  • Cupronickel

  • Nickel Aluminum Bronze

  • Gunmetal-Naval Grade

  • Graded Cast iron

  • Carbon steel

  • Stainless Steel - 304, 304L, 316, 316L

  • Hastolly

  • Inconel

  • Monel





Process Flow - Heat Exchangers India ABOUT US



Company Profile

Organization Chart

Skid Mounted - Heat Exchangers India PRODUCTS

Shell & Tube Heat Exchangers Shell
Marine Coolers
Inter Coolers  After Coolers
Air Cooled Heat Exchangers
Extended Surface Heat Exchangers
Oil Coolers
Charged Air Coolers
Process Flow Skid
Header Tank Heat Exchangers
Pressure Vessels

Header Tank - Heat Exchangers India  CAPABILITY

Material Capability
Customer Profile



Pressure Vessels - Heat Exchangers India  HUMAN RESOURCES


Corporate Social Responsibility

Air Cooled - Heat Exchangers India  GALLERY

Corporate Video
Product Catalogues
Product Gallery


Business Enquiry

Contact Details