Oil Coolers
Looking for Heat Exchanger for Automotive Oils, Turbine Oil, Hydraulic Oils, Engine Oils, Automatic Lubrication Oil, Metal Working Oils (Fluid), Fuel Oil, Organic Oils (Food Grade Oil) Mineral oils, Cooking Oil, Cosmetic Oils, Lubrication Oil, Heat Transfer Oil, Machine Oils & many more Oils.
United Heat Transfer Pvt. Ltd (UHTPL) will provide you the solution you need to succeed.
Engineering Capabilities includes performing thermal Rating, Design & Simulation on HTRI and mechanical designing of heat exchanger. Mechanical Designing in accordance with ASME Section VIII Div. 1, Div. 2,, TEMA R-B-C (Good Engineering Practice), API 660, 661, IS 2825 & IS 4503.
UHTPL program covers temperature related thermal properties of process oils, taken from product specification sheets of the Shell, Mobil Oil and Exxon company may be called by including the data in the thermal, hydraulic design.
The following properties are generated for different viscosity classes
- Kinematic viscosity.
- Density.
- Heat conductivity.
- Specific heat capacity.
UHTPL oil coolers are suitable for heat transfer fluids, lubricating oils and quenching oils. (We advise to check viscosity while selecting the cooler). UHTPL Oil cooler are removable floating bundle heat exchanger, allowing differential thermal expansion between shell and tubes as well as between individual tubes. Bundle can be easily removed and cleaned, if necessary.
We have listed out some of typical examples of oil cooler performance based on following operating fluid data:
- Oil type and its viscosity at specified temperature
- Oil flow in LPM
- Oil outlet temperature in °C.
- Heat being dissipated
- Inlet temperature of cooling water
Following points shall be taken care of while installing / selecting oil cooler:
- Cooler fluids should be arranged to have benefit of counter flow.
- During the shutdowns over-pressurization shall be avoided.
- Cooling water flow rate must be followed.
- Cooling water considered is with pH value between 7.2-7.4. You may ask for required water quality parameters before selecting the water.
- Oil pressure in the cooler shall be kept higher than water pressure. This will avoid contamination of oil with water in case of any unfortunate leakage.
Physical properties of typical machine oils are available with us:
| Shell Tellus | Hydraulic Oil | ISO VG 10, 22, 32, 46, 68, 100 |
|---|---|---|
|
Esso Nuto H 46 |
Hydraulic Oil |
|
|
Shell Omala |
Transmission Oil |
ISO VG 68, 100, 150, 220, 320, 460, 680 |
|
Esso Spartan EP 220 |
Industrial Transmission Oil |
|
|
Mobilgear 632 |
Transmission Oil |
|
|
Shell Diala |
Transmission Oil |
|
|
Midel 7131 |
Transmission Oil |
|
|
Shell Turbo T |
Turbine Oil |
ISO VG 32, 46, 68, 78 |
|
Esso Thermalöl T |
Thermal Oil |
|
|
Essotherm 650 |
Thermal Oil |
|
|
Esso Thermalöl S |
Thermal Oil |
|
|
Essolube LDX 10W-40 |
HD-Engine Oil |
|
|
Mobil Rarus 827 |
Compressor Oil |
|
|
Additional oils on request |
Application of Oil Coolers:
| Oil Consoles Heat Exchangers | Marine Engine Heat Exchangers | Turbine Heat Exchangers | Rolling mills Heat Exchangers |
|---|---|---|---|
|
Cutting oil (Coolant) Heat Exchangers |
Diesel Engines / Heavy Vehicle Heat Exchangers |
Plastic injection moulding machine |
Transformers Heat Exchangers |
|
Quench Oil System Heat Exchangers |
Plastic Blowing Machines Heat Exchangers |
Hydraulic Presses Heat Exchangers |
Hydraulic Power Pack Heat Exchangers |
|
Fluid Couplings Heat Exchangers |
Compressors Heat Exchangers |
Gearboxes Heat Exchangers |
Lube oil systems Heat Exchangers |
|
Rail-Way Engine Heat Exchangers |
Hydraulic Oils Heat Exchangers |
Fuel oil Heat Exchangers |
Trucks Engine Oil Heat Exchangers |
